Ceramic Fibre Module
The same fibre supplied as folded, pre-compressed modules at over 160 kg/m³, 42–46% alumina and 52–58% silica, classified to 1260 °C. Modules go up against the shell on their own anchors, so a full lining is installed and fired in a fraction of the time a brick or castable lining takes.
| Al₂O₃ content, % | 42 – 46 |
|---|---|
| Fe₂O₃ content, % | 0.1 |
| SiO2 | 52 – 58 |
| Classification temperature °C | 1260 |
| Density kg/m3 | : > 160 |
Values as published by the manufacturer. Manufacturer TDS governs.
Full furnace and heater linings, roof and wall veneering over existing brickwork, and reline work where downtime is the binding constraint.
Read the engineering note →Manufacturer technical datasheets and safety data sheets for this line are available on request — ask for them with your enquiry and we will send them with the quotation.
Request the datasheet →More in Ceramic Fibre