Anuj Traders

COIL COAT A

A ready-to-use ceramic-bonded coating rather than a castable — 85–90% alumina ground to 50 microns, applied by brush, spray or dipping, and rated to 1800 °C. Iron oxide is held to 0.8%. Supplied wet in 5, 10 and 20 kg buckets, so there is no mixing water to add.

COIL COAT A — product photograph
Representative image · legacy catalogue
Technical specifications for COIL COAT A
NATURE OF BONDCERAMIC
INSTALLATIONBRUSH / SPRAY / DIPPING
MAX.SERVICE TEMPERATURE1800°C
MAXIMUM PARTICLE SIZE50 microns
WATER REQUIRED FOR APPLICATIONReady-to-use
Al₂O₃ content, %85 - 90
CaO3.0
Fe₂O₃ content, %0.8
Dry density g/cc After drying at 110°C/ 24hrs2.60
CCS kg/cm2 After drying at 110°C/ 24hrsN/A (Coating)
After heating at 1100°C/ 3hrsHigh Adhesion
After heating at 1550°C/ 3hrsHigh Erosion Resistance
% Retained on maximum size0.3
Refractoriness, Orton /°C40/+1870
After heating at 1100°C/ 3hrs-0.05
After heating at 1500°C/ 3hrs-0.9
PACKING5KG / 10KG / 20KG BUCKET

Values as published by the manufacturer. Manufacturer TDS governs.

More in Castables